Page 24 of 33
Swingarm Pivot Nut Rubber FRA93180 Fits 850/1000 ALL Models, Nevada 750 ALL, Quota 1100, Breva 750, V7 Classic, Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Nevada 350, V65 ALL, V35 II, V35 3, V50 3, V35C, V50C, Imola, NTX 350, NTX 650, 750 Targa, Strada 750, V65 GT, V35 GT Dimensions: 9.8mm OD to push into nut Rubber plug for swing arm pivot locknut More than 5 in stock 93180105 GU93180105 93 18 01 05 9318 0105 9318.0105 93.18.01.05 £1.20 INC VAT £1.00 EX VAT
Choke Plunger Return Spring FUA13601 Fits Nuovo Falcone, V7 Special (1969-1971), V7 700 (VHB carb), 850 GT, G5, Cali 2, 1000 SP, T3, T4, SP II, T5, Mille GT, 850T, V7 Sport, 750S, S3, Cali 3, Cali 1100 (carb), Le Mans 1, Le Mans 2, Le Mans 3, Strada 1000 Dellorto choke plunger return spring for models with Dellorto VHB 30, PHF 30 and PHF 36 carbs More than 5 in stock 13937600 GU13937600 13 93 76 00 1393 7600 1393.7600 13.93.76.00 £1.70 INC VAT £1.42 EX VAT
Carburettor Fuel Filter FUA60888 Fits V7 700, V7 Special, 850 GT, 1100 Sport Carb, Cali 3, Cali 1100 Carb, 850/1000 ALL Models, Nevada 350, Nevada (1991-2003), V35 ALL, V50 ALL, V65 ALL, V7 Sport, 750S, S3 Dimensions: 7.5mm internal diameter Fuel filter for Dellorto carb petrol pipe union. Also known as Guzzi ref. 002127628 and Ducati ref. 002127628 More than 5 in stock 43934000 GU43934000 43 93 40 00 4393 4000 4393.4000 43.93.40.00 Also fits Benelli Sei 750, Benelli Sei 900, Ducati 350-500 Twin,
Ducati 350-500 Twin GTV,
Ducati 350-500 Twin Sport,
Ducati 500 SL Pantah,
Ducati 600 SL Pantah,
Ducati 750 GT/Sport Koewe,
Ducati 750/900 SS Koewe,
Ducati 750 F1/Laguna Seca,
Ducati 860/900 GTS,
Ducati 900 Darmah,
Ducati 900 MHR, S2,
Ducati 900 MHR-I,
Ducati 1000 MHR-2,S2 £1.90 INC VAT £1.58 EX VAT
Air Filter UFI 2777900 conical SIA17113 Fits T3, T4, 1000 SP, Convert, G5, V35 I, V35 II, V35 3, V35C, Imola, Imola II, V50 I, V50 II, V50C, V50 3, Monza, NTX 350, V35 Florida, V40 Capri Dimensions: approx 195mm x 75mm diameter at wide end UFI 27 77 900 conical air filter See FUA90552 for air filter housing O ring More than 5 in stock 17113651 GU17113651 17 11 36 51 1711 3651 1711.3651 17.11.36.51 £12.00 INC VAT £10.00 EX VAT
Rear Wheel Spindle Nut and Washer Kit SSA92316 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Daytona, Centauro, Quota 1100, V35 ALL, V50 ALL, V65 ALL, Nevada 350, Nevada 750, V7 Sport, MGS-01 Dimensions: M16 M16 stainless steel full nut and thick washer for rear wheel spindle Also referred to as Guzzi ref. 14634400 and 92602316 More than 5 in stock 92602316-z 92602316 GU92602316 92 60 23 16 9260 2316 9260.2316 92.60.23.16 £10.50 INC VAT £8.75 EX VAT
Front Wheel Spindle Nut and Washer Kit SSA92516 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), 1100 Sport carb, V35 ALL, V50 ALL, V65 ALL, Nevada 350, Nevada 750 Dimensions: M16 M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer NB this is a half nut. Can also be used as alternator retaining nut 92603516 More than 5 in stock 92602516-z 92602516 GU92602516 92 60 25 16 9260 2516 9260.2516 92.60.25.16 £8.50 INC VAT £7.08 EX VAT
Bearing Steering Head SUA92249 Fits V7 700, V7 Special (1969-1971), V7 Sport, S3, 750S, 850T, 850 GT, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV (1997-2006), Cali Stone, Cali Jackal, Cali Vintage, Nevada 350, Nevada 750, Quota ALL, V11 Sport, Centauro, Lario, V65 Florida, NTX 350, V35C (series 2), V50C (series 2), V65 GT, V65 TT, V65 Lario, V65 Florida, V75, 750T, Strada 750, 750 Targa, V7 Classic, V7 Cafe, V7 Racer, Breva 750, Bellagio, V7 II ALL
Taper needle roller bearing used as steering head bearing 2 sets required per bike. Also used as rear drive box pinion bearing on big twins with rear drum brake More than 5 in stock 92249225 GU92249225 92 24 92 25 9224 9225 9224.9225 92.24.92.25 £20.50 INC VAT £17.08 EX VAT
Clip Tank Badge TAA14100 Fits G5, Convert, T3, T4, 1000 SP, Le Mans 1, Le Mans 2, V35, V50 Dimensions: 4mm OD Tank badge retaining clip 2 required per badge More than 5 in stock 14105100 GU14105100 14 10 51 00 1410 5100 1410.5100 14.10.51.00 £2.00 INC VAT £1.67 EX VAT
Tank Strap TAA14102 Fits G5, Cali 2, Daytona ALL, 1000 SP, SP II, Le Mans 1, Le Mans 2, Le Mans 3, Mille GT, 1000S, 850T, S3, T3, T4, T5, T5 Polizia, V11 Sport, V7 Sport Dimensions: 152mm x 35mm x 8mm overall Rubber tank fastening strap Used as battery strap on V11 and Daytona More than 5 in stock 14102600-z 14102600 GU14102600 14 10 26 00 1410 2600 1410.2600 14.10.26.00 Also fits Benelli 650 Tornado £9.50 INC VAT £7.92 EX VAT
Automatic Bleed Valve M6 Bleed Nipple BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL Dimensions: M6 x 16mm The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed. - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover More than 5 in stock
£26.50 INC VAT £22.08 EX VAT
Page 24 of 33
|